Skip to content

C
charts
Commit 3e79314a by trierra
Options

add Portworx chart v1.0.2

Signed-off-by: 's avatartrierra <oksana@portworx.com>
parent 5a31b5e1
Showing with 1357 additions and 398 deletions
charts/portworx/v1.0.2/Chart.yaml
name: portworx
appVersion: 1.0.1
version: 1.0.1
appVersion: 1.0.2
version: 1.0.2
description: A Helm chart for installing Portworx on Kubernetes.
keywords:
- Storage
......
charts/portworx/v1.0.2/README.md
# Portworx
## Pre-requisites
## **Pre-requisites**
This helm chart deploys [Portworx](https://portworx.com/) and [Stork](https://docs.portworx.com/scheduler/kubernetes/stork.html) on your Kubernetes cluster. The minimum requirements for deploying the helm chart are as follows:
Use this Helm chart to deploy [Portworx](https://portworx.com/) and [Stork](https://docs.portworx.com/scheduler/kubernetes/stork.html) to your Kubernetes cluster.
- All [Pre-requisites](https://docs.portworx.com/scheduler/kubernetes/install.html#prerequisites) for Portworx must be fulfilled.
Prerequisites
## Limitations
* The portworx helm chart can only be deployed in the kube-system namespace. Hence use "kube-system" in the "Target namespace" during configuration.
* You can only deploy one portworx helm chart per Kubernetes cluster.
## Uninstalling the Chart
To uninstall/delete the `my-release` deployment:
Refer to the [Install Portworx on Kubernetes via Helm](https://docs.portworx.com/portworx-install-with-kubernetes/install-px-helm/#pre-requisites) page for the list of prerequisites.
> **Tip** > The Portworx configuration files under `/etc/pwx/` directory are preserved, and will not be deleted.
## **Limitations**
* The portworx helm chart can only be deployed in the kube-system namespace. Hence use "kube-system" in the "Target namespace" during configuration.
```
helm delete my-release
```
The command removes all the Kubernetes components associated with the chart and deletes the release.
## **Uninstalling the Chart**
#### You can uninstall Portworx using one of the following methods:
## Documentation
* [Portworx docs site](https://docs.portworx.com/scheduler/kubernetes/)
* [Portworx interactive tutorials](https://docs.portworx.com/scheduler/kubernetes/px-k8s-interactive.html)
#### **1. Delete all the Kubernetes components associated with the chart and the release.**
## Installing the Chart using the CLI
> **Note** > The Portworx configuration files under `/etc/pwx/` directory are preserved, and will not be deleted.
To install the chart with the release name `my-release` run the following commands substituting relevant values for your setup:
To perform this operation simply delete the application from the Apps page
##### NOTE:
`kvdb` is a required field. The chart installation would not proceed unless this option is provided.
If the etcdcluster being used is a secured ETCD (SSL/TLS) then please follow instructions to create a kubernetes secret with the certs. https://docs.portworx.com/scheduler/kubernetes/etcd-certs-using-secrets.html#create-kubernetes-secret
#### **2. Wipe your Portworx installation**
> **Note** > The commands in this section are disruptive and will lead to data loss. Please use caution..
See more details [here](https://2.1.docs.portworx.com/portworx-install-with-kubernetes/install-px-helm/#uninstall)
`clusterName` should be a unique name identifying your Portworx cluster. The default value is `mycluster`, but it is suggested to update it with your naming scheme.
## **Documentation**
* [Portworx docs site](https://docs.portworx.com/install-with-other/rancher/rancher-2.x/#step-1-install-rancher)
* [Portworx interactive tutorials](https://docs.portworx.com/scheduler/kubernetes/px-k8s-interactive.html)
Example of using the helm CLI to install the chart:
```
helm install --debug --name my-release --set kvdb=etcd:http://192.168.70.90:2379,clusterName=$(uuid) ./helm/charts/portworx/
```
## **Installing the Chart using the CLI**
## Basic troubleshooting
See the installation details [here](https://2.1.docs.portworx.com/portworx-install-with-kubernetes/install-px-helm/)
#### Helm install errors with "no available release name found"
## **Installing Portworx on AWS**
```
helm install --dry-run --debug --set kvdb=etcd:http://192.168.70.90:2379,clusterName=$(uuid) ./helm/charts/px/
[debug] Created tunnel using local port: '37304'
[debug] SERVER: "127.0.0.1:37304"
[debug] Original chart version: ""
[debug] CHART PATH: /root/helm/charts/px
See the installation details [here](https://2.1.docs.portworx.com/cloud-references/auto-disk-provisioning/aws)
Error: no available release name found
```
This most likely indicates that Tiller doesn't have the right RBAC permissions.
You can verify the tiller logs
```
[storage/driver] 2018/02/07 06:00:13 get: failed to get "singing-bison.v1": configmaps "singing-bison.v1" is forbidden: User "system:serviceaccount:kube-system:default" cannot get configmaps in the namespace "kube-system"
[tiller] 2018/02/07 06:00:13 info: generated name singing-bison is taken. Searching again.
[tiller] 2018/02/07 06:00:13 warning: No available release names found after 5 tries
[tiller] 2018/02/07 06:00:13 failed install prepare step: no available release name found
```
## ** Giving your etcd certificates to Portworx using Kubernetes Secrets.**
This is the recommended way of providing etcd certificates, as the certificates will be automatically available to the new nodes joining the cluster
#### Helm install errors with "Job failed: BackoffLimitExceeded"
* Create Kubernetes secret
* Copy all your etcd certificates and key in a directory etcd-secrets/ to create a Kubernetes secret from it. Make sure the file names are the same as you gave above.
```
helm install --debug --set dataInterface=eth1,managementInterface=eth1,kvdb=etcd:http://192.168.70.179:2379,clusterName=$(uuid) ./helm/charts/px/
[debug] Created tunnel using local port: '36389'
[debug] SERVER: "127.0.0.1:36389"
[debug] Original chart version: ""
[debug] CHART PATH: /root/helm/charts/px
Error: Job failed: BackoffLimitExceeded
# ls -1 etcd-secrets/
etcd-ca.crt
etcd.crt
etcd.key
```
This most likely indicates that the pre-install hook for the helm chart has failed due to a misconfigured or inaccessible ETCD url.
Follow the below steps to check the reason for failure.
* Use kubectl to create the secret named px-etcd-certs from the above files:
```
kubectl get pods -nkube-system -a | grep preinstall
px-etcd-preinstall-hook-hxvmb 0/1 Error 0 57s
kubectl logs po/px-etcd-preinstall-hook-hxvmb -nkube-system
Initializing...
Verifying if the provided etcd url is accessible: http://192.168.70.179:2379
Response Code: 000
Incorrect ETCD URL provided. It is either not reachable or is incorrect...
# kubectl -n kube-system create secret generic px-etcd-certs --from-file=etcd-secrets/
```
Ensure the correct etcd URL is set as a parameter to the `helm install` command.
#### Helm install errors with "Job failed: Deadline exceeded"
* Notice that the secret has 3 keys etcd-ca.crt, etcd.crt and etcd.key, corresponding to file names in the etcd-secrets folder. We will use these keys in the Portworx spec file to reference the certificates.
```
helm install --debug --set dataInterface=eth1,managementInterface=eth1,kvdb=etcd:http://192.168.20.290:2379,clusterName=$(uuid) ./charts/px/
[debug] Created tunnel using local port: '39771'
[debug] SERVER: "127.0.0.1:39771"
# kubectl -n kube-system describe secret px-etcd-certs
Name: px-etcd-certs
Namespace: kube-system
Labels: <none>
Annotations: <none>
[debug] Original chart version: ""
[debug] CHART PATH: /root/helm/charts/px
Type: Opaque
Error: Job failed: DeadlineExceeded
```
This error indicates that the pre-install hook for the helm chart has failed to run to completion correctly. Verify that the etcd URL is accessible. This error occurs on kubernetes cluster(s) with version below 1.8
Follow the below steps to check the reason for failure.
```
kubectl get pods -nkube-system -a | grep preinstall
px-hook-etcd-preinstall-dzmkl 0/1 Error 0 6m
px-hook-etcd-preinstall-nlqwl 0/1 Error 0 6m
px-hook-etcd-preinstall-nsjrj 0/1 Error 0 5m
px-hook-etcd-preinstall-r9gmz 0/1 Error 0 6m
kubectl logs po/px-hook-etcd-preinstall-dzmkl -nkube-system
Initializing...
Verifying if the provided etcd url is accessible: http://192.168.20.290:2379
Response Code: 000
Incorrect ETCD URL provided. It is either not reachable or is incorrect...
Data
====
etcd-ca.crt: 1679 bytes
etcd.crt: 1680 bytes
etcd.key: 414 bytes
```
Ensure the correct etcd URL is set as a parameter to the `helm install` command.
Once above secret is created, proceed to the next steps.
charts/portworx/v1.0.2/app-readme.md
# Portworx
[Portworx](https://portworx.com/) is a software defined persistent storage solution designed and purpose built for applications deployed as containers, via container orchestrators such as Kubernetes, Marathon and Swarm. It is a clustered block storage solution and provides a Cloud-Native layer from which containerized stateful applications programmatically consume block, file and object storage services directly through the scheduler.
[Portworx](https://portworx.com/) is a software defined storage overlay that allows you to
* Run containerized stateful applications that are highly-available (HA) across multiple nodes, cloud instances, regions, data centers or even clouds
* Migrate workflows between multiple clusters running across same or hybrid clouds
* Run hyperconverged workloads where the data resides on the same host as the applications
* Have programmatic control on your storage resources
\ No newline at end of file
charts/portworx/v1.0.2/ci/test-values.yaml 0 → 100644
etcdType: Built-in
\ No newline at end of file
charts/portworx/v1.0.2/questions.yml
......@@ -6,115 +6,876 @@ labels:
questions:
################################### KVDB options ################################
- variable: internalKVDB
description: "Select if you wish to run internal kvdb. Note internal kvdb is in beta. DO NOT enable internal kvdb when running with KOPS. The kvdb endpoints provided above will be ignored."
type: boolean
label: Enable Internal KVDB store
default: false
- variable: etcdType
label: "Select ETCD"
type: enum
required: true
group: "Key value store parameters (Required)"
options:
- "Provide your own etcd"
- "Built-in"
# ------ "Provide your own etcd" ------
- variable: ownEtcdOption
show_if: "etcdType=Provide your own etcd"
label: "Select one of 2 options for your ETCD cluster"
type: enum
required: true
group: "Key value store parameters (Required)"
options:
- "Your etcd details"
- "Portworx hosted (for PoCs only)"
- variable: etcdAuth
show_if: "ownEtcdOption=Your etcd details&&etcdType=Provide your own etcd"
label: "Select an auth option for your ETCD cluster"
type: enum
default: "Disable HTTPS"
required: true
group: "Key value store parameters (Required)"
options:
- "Disable HTTPS"
- "Certificate Auth"
- "Password Auth"
- variable: region
show_if: "ownEtcdOption=Portworx hosted (for PoCs only)"
label: "Select region"
type: enum
required: true
group: "Key value store parameters (Required)"
options:
- "US region"
- "EU region"
# kvdb endpoint
- variable: kvdb
description: "Points to your key value store, such as an etcd cluster or a consul cluster. Use semicolon separated for multiple endpoints. (example: etcd:http://etcd-1.com.net:2379;etcd:http://etcd-2.com.net:2379;etcd:http://etcd-3.com.net:2379)"
show_if: "ownEtcdOption=Your etcd details"
description: "Enter your etcd or Consul endpoints separated by semicolons. Use the following as an example: etcd://myetc1.company.com:2379;etcd://myetc2.company.com.2379. Note: If the `etcdAuth` key is set to 'Disable HTTPS', you must provide HTTP endpoints."
type: string
label: "Endpoint address"
required: true
show_if: "internalKVDB=false"
group: "Key value store parameters (Required)"
- variable: etcd.ca
show_if: "etcdAuth=Certificate Auth"
description: "Name of CA file for ETCD authentication. Example: etcd-ca.crt. Follow https://docs.portworx.com/scheduler/kubernetes/etcd-certs-using-secrets.html to create a Kubernetes secret for the etcd certs."
type: string
required: true
default: server1.ca.crt
label: "ETCD CA file"
group: "Key value store security Parameters"
show_if: "internalKVDB=false"
group: "Key value store security Parameters (Details in README)"
- variable: etcd.cert
show_if: "etcdAuth=Certificate Auth"
description: "Name of certificate for ETCD authentication. Example: etcd.crt"
type: string
default: server1.crt
required: true
label: "ETCD cert file"
group: "Key value store security Parameters"
show_if: "internalKVDB=false"
group: "Key value store security Parameters (Details in README)"
- variable: etcd.key
show_if: "etcdAuth=Certificate Auth"
description: "Name of certificate key for ETCD authentication Example: etcd.key"
type: string
default: server1.key.insecure
required: true
label: "ETCD cert key file"
group: "Key value store security Parameters"
show_if: "internalKVDB=false"
group: "Key value store security Parameters (Details in README)"
- variable: etcd.credentials
show_if: "etcdAuth=Password Auth"
description: "Username and password for ETCD authentication in the form user:password. Not needed if using certificates."
type: string
required: true
label: "ETCD credentials"
group: "Key value store security Parameters"
show_if: "internalKVDB=false"
- variable: consul.acl
description: "ACL token value used for Consul authentication. (example: 398073a8-5091-4d9c-871a-bbbeb030d1f6). Needed only for consul."
group: "Key value store security Parameters (Details in README)"
################################### Storage options ################################
- variable: environment
description: "Select your environment"
label: "Environment"
type: enum
default: "OnPrem"
required: true
group: "Storage Parameters"
options:
- "OnPrem"
- "Cloud"
- variable: provider
show_if: "environment=Cloud"
description: "Select cloud platform"
label: "Cloud provider"
type: enum
required: true
group: "Storage Parameters"
options:
- "AWS"
- "Google cloud/GKE"
- variable: onpremStorage
show_if: "environment=OnPrem"
type: enum
default: "Automatically scan disks"
label: "Select type of OnPrem storage"
group: "Storage Parameters"
required: true
options:
- "Automatically scan disks"
- "Manually specify disks"
- variable: deviceConfig
show_if: "environment=Cloud"
description: "If you plan to use EC2 instance storage or plan to manage EBS volumes your own way, select 'Consume unused' or 'Use Existing disks'."
label: "Select a type of disk"
type: enum
default: "Create Using a Spec"
required: true
group: "Storage Parameters"
options:
- "Create Using a Spec"
- "Consume Unused"
- "Use Existing Disks"
-
- variable: journalDevice
description: "This allows PX to create it’s own journal partition on the best drive to absorb PX metadata writes. Journal writes are small with frequent syncs and hence a separate journal partition will enable better performance. Use value 'auto' if you want Portworx to create it's own journal partition."
type: string
group: "Key value store security Parameters"
label: Consul ACL Token
show_if: "internalKVDB=false"
label: "Journal Device"
group: "Storage Parameters"
############ Consume unused ##############
- variable: usedrivesAndPartitions
show_if: "deviceConfig=Consume Unused||onpremStorage=Automatically scan disks"
label: "Use unmounted drives and partitions"
descrition: "Use unmounted disks even if they have a partition or filesystem on it. PX will never use a drive or partition that is mounted."
type: boolean
default: false
group: "Storage Parameters"
################################### Storage options ################################
- variable: drives
description: "This is a ';' seperated list of drives. For eg: '/dev/sda;/dev/sdb;/dev/sdc'. If left empty, Portworx will try to use available drives."
label: "Drives"
############ Use Exising Disks ##############
- variable: existingDisk1
show_if: "deviceConfig=Use Existing Disks||onpremStorage=Manually specify disks"
label: "Drive/Device1"
description: "Enter the block/device name; eg: /dev/sda"
type: string
required: true
group: "Storage Parameters"
- variable: usefileSystemDrive
- variable: addExistingDisk2
show_if: "deviceConfig=Use Existing Disks||onpremStorage=Manually specify disks"
label: "Add another drive?"
type: boolean
default: false
label: "Use drives with a filesystem."
description: "Instructs PX to use drives with a filesystem."
group: "Storage Parameters"
- variable: existingDisk2
show_if: "addExistingDisk2=true"
label: "Drive/Device2"
description: "Enter the block/device name; eg: /dev/sda"
type: string
required: true
group: "Storage Parameters"
- variable: addExistingDisk3
show_if: "addExistingDisk2=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: usedrivesAndPartitions
- variable: existingDisk3
show_if: "addExistingDisk3=true"
label: "Drive/Device3"
description: "Enter the block/device name; eg: /dev/sda"
type: string
required: true
group: "Storage Parameters"
- variable: addExistingDisk4
show_if: "addExistingDisk3=true"
label: "Add another drive?"
type: boolean
default: false
description: "Instructs PX to use unmounted drives and partitions."
group: "Storage Parameters"
- variable: existingDisk4
show_if: "addExistingDisk4=true"
label: "Drive/Device4"
description: "Enter the block/device name; eg: /dev/sda"
type: string
required: true
group: "Storage Parameters"
- variable: addExistingDisk5
show_if: "addExistingDisk4=true"
label: "Add another drive?"
type: boolean
label: "Use unmounted drives and partitions"
default: false
group: "Storage Parameters"
- variable: journalDevice
description: "This allows PX to create it’s own journal partition on the best drive to absorb PX metadata writes. Journal writes are small with frequent syncs and hence a separate journal partition will enable better performance. Use value 'auto' if you want Portworx to create it's own journal partition."
- variable: existingDisk5
show_if: "addExistingDisk5=true"
label: "Drive/Device5"
description: "Enter the block/device name; eg: /dev/sda"
type: string
label: "Journal Device"
required: true
group: "Storage Parameters"
##################################################### Cloud ################################
##################################################### AWS ################################
### Section 1 AWS
- variable: drive_1.aws.type
show_if: "provider=AWS&&deviceConfig=Create Using a Spec"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
default: "GP2"
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_1.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_1.aws.size
show_if: "provider=AWS&&deviceConfig=Create Using a Spec"
description: "Volume size"
label: "Size"
type: int
default: 150
required: true
group: "Storage Parameters"
### Section 2 AWS
- variable: addEBSDrive_2
show_if: "provider=AWS&&deviceConfig=Create Using a Spec"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_2.aws.type
show_if: "addEBSDrive_2=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_2.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_2.aws.size
show_if: "addEBSDrive_2=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
### Section 3 AWS
- variable: addEBSDrive_3
show_if: "addEBSDrive_2=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_3.aws.type
show_if: "addEBSDrive_3=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_3.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_3.aws.size
show_if: "addEBSDrive_3=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
### Section 4 AWS
- variable: addEBSDrive_4
show_if: "addEBSDrive_3=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_4.aws.type
show_if: "addEBSDrive_4=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_4.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_4.aws.size
show_if: "addEBSDrive_4=true"
description: "Volume size"
label: "Size"
required: true
type: int
group: "Storage Parameters"
### Section 5 AWS
- variable: addEBSDrive_5
show_if: "addEBSDrive_4=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_5.aws.type
show_if: "addEBSDrive_5=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_5.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_5.aws.size
show_if: "addEBSDrive_5=true"
description: "Volume size"
label: "Size"
required: true
type: int
group: "Storage Parameters"
### Section 6 AWS
- variable: addEBSDrive_6
show_if: "addEBSDrive_5=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_6.aws.type
show_if: "addEBSDrive_6=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_6.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_6.aws.size
show_if: "addEBSDrive_6=true"
description: "Volume size"
label: "Size"
required: true
type: int
group: "Storage Parameters"
### Section 7 AWS
- variable: addEBSDrive_7
show_if: "addEBSDrive_6=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_7.aws.type
show_if: "addEBSDrive_7=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_7.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_7.aws.size
show_if: "addEBSDrive_7=true"
description: "Volume size"
label: "Size"
required: true
type: int
group: "Storage Parameters"
### Section 8 AWS
- variable: addEBSDrive_8
show_if: "addEBSDrive_7=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_8.aws.type
show_if: "addEBSDrive_8=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_8.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_8.aws.size
show_if: "addEBSDrive_8=true"
description: "Volume size"
label: "Size"
required: true
type: int
group: "Storage Parameters"
### Section 9 AWS
- variable: addEBSDrive_9
show_if: "addEBSDrive_8=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_9.aws.type
show_if: "addEBSDrive_9=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_9.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_9.aws.size
show_if: "addEBSDrive_9=true"
description: "Volume size"
label: "Size"
required: true
type: int
group: "Storage Parameters"
### Section 10 AWS
- variable: addEBSDrive_10
show_if: "addEBSDrive_9=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_10.aws.type
show_if: "addEBSDrive_10=true"
description: "Select the type of EBS volume"
label: "EBS volume"
type: enum
required: true
show_subquestion_if: "IO1"
group: "Storage Parameters"
options:
- "GP2"
- "IO1"
subquestions:
- variable: drive_10.aws.iops
required: true
description: "*IOPS required from EBS volume"
type: int
label: IOPS
- variable: drive_10.aws.size
show_if: "addEBSDrive_10=true"
description: "Volume size"
label: "Size"
required: true
type: int
group: "Storage Parameters"
##################################################### GOOGLE CLOUD ################################
#### Section 1 GC
- variable: drive_1.gc.type
show_if: "provider=Google cloud/GKE&&deviceConfig=Create Using a Spec"
description: "Select volume type"
label: "Volume"
type: enum
default: "standard"
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_1.gc.size
show_if: "provider=Google cloud/GKE&&deviceConfig=Create Using a Spec"
description: "Volume size"
label: "Size"
type: int
default: 150
required: true
group: "Storage Parameters"
#### Section 2 GC
- variable: addGCDrive_2
show_if: "provider=Google cloud/GKE&&deviceConfig=Create Using a Spec"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_2.gc.type
show_if: "addGCDrive_2=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_2.gc.size
show_if: "addGCDrive_2=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 3 GC
- variable: addGCDrive_3
show_if: "addGCDrive_2=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_3.gc.type
show_if: "addGCDrive_3=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_3.gc.size
show_if: "addGCDrive_3=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 4 GC
- variable: addGCDrive_4
show_if: "addGCDrive_3=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_4.gc.type
show_if: "addGCDrive_4=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_4.gc.size
show_if: "addGCDrive_4=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 5 GC
- variable: addGCDrive_5
show_if: "addGCDrive_4=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_5.gc.type
show_if: "addGCDrive_5=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_5.gc.size
show_if: "addGCDrive_5=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 6 GC
- variable: addGCDrive_6
show_if: "addGCDrive_5=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_6.gc.type
show_if: "addGCDrive_6=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_6.gc.size
show_if: "addGCDrive_6=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 7 GC
- variable: addGCDrive_7
show_if: "addGCDrive_6=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_7.gc.type
show_if: "addGCDrive_6=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_7.gc.size
show_if: "addGCDrive_7=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 8 GC
- variable: addGCDrive_8
show_if: "addGCDrive_7=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_8.gc.type
show_if: "addGCDrive_8=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_8.gc.size
show_if: "addGCDrive_8=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 9 GC
- variable: addGCDrive_9
show_if: "addGCDrive_8=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_9.gc.type
show_if: "addGCDrive_9=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_9.gc.size
show_if: "addGCDrive_9=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
#### Section 10 GC
- variable: addGCDrive_10
show_if: "addGCDrive_9=true"
label: "Add another drive?"
type: boolean
default: false
group: "Storage Parameters"
- variable: drive_10.gc.type
show_if: "addGCDrive_10=true"
description: "Select volume type"
label: "Volume"
type: enum
required: true
group: "Storage Parameters"
options:
- "standard"
- "ssd"
- variable: drive_10.gc.size
show_if: "addGCDrive_10=true"
description: "Volume size"
label: "Size"
type: int
required: true
group: "Storage Parameters"
- variable: maxStorageNodes
show_if: "environment=Cloud&&deviceConfig=Create Using a Spec"
description: "Max storage nodes per availability zone"
label: "Max storage nodes (Optional)"
type: int
group: "Storage Parameters"
################################### Network options ################################
- variable: dataInterface
description: "Specify data network interface. This is useful if your instances have non-standard network interfaces. (example: eth1). By default, Portworx will select the first routable interface."
description: "Specify your data network interface (example: `eth1`). If set to `auto`, Portworx will automatically select the first routable interface."
type: string
label: "Data Network Interface"
default: auto
group: "Network Parameters"
- variable: managementInterface
description: "Specify management network interface. This is useful if your instances have non-standard network interfaces. (example: eth1). By default, Portworx will select the first routable interface.<Paste>"
description: "Specify your management network interface (example: `eth1`). If set to `auto`, Portworx will automatically select the first routable interface."
type: string
default: auto
label: "Management Network Interface"
group: "Network Parameters"
################################### Platform options ################################
- variable: pksInstall
default: false
label: "Installing on Pivotal Container Service (PKS)"
description: "Select if installing on Pivotal Container service."
type: boolean
- variable: platformOptions
type: enum
label: "Platform"
group: "Platform Parameters"
- variable: AKSorEKSInstall
default: false
label: "Installing on AKS or EKS"
description: "Select if installing on Amazon Elastic Container Service for Kubernetes (EKS) or Azure Kubernetes Service (AKS)."
options:
- "AKS"
- "EKS"
- "GKE"
################################### Registry settings options ################################
- variable: customRegistry
label: "Use a custom container registry?"
type: boolean
group: "Platform Parameters"
- variable: isTargetOSCoreOS
default: false
label: "Installing on CoreOS"
description: "Select if installing on CoreOS"
type: boolean
group: "Platform Parameters"
group: "Container Registry Parameters"
################################### Registry settings options ################################
- variable: registrySecret
show_if: "customRegistry=true"
description: "Specify a custom Kubernetes secret that will be used to authenticate with a container registry. Must be defined in kube-system namespace. (example: regcred)"
type: string
label: "Registry Kubernetes Secret"
group: "Container Registry Parameters"
- variable: customRegistryURL
show_if: "customRegistry=true"
description: "Specify a custom container registry server (including repository) that will be used instead of index.docker.io to download Docker images. (example: dockerhub.acme.net:5443 or myregistry.com/myrepository/)"
label: "Custom Registry URL"
type: string
......@@ -123,63 +884,40 @@ questions:
################################## Optional features ############################
- variable: csi
description: "Select if you want to enable CSI (Container Storage Interface). CSI is still in ALPHA."
type: boolean
label: "Enable CSI"
default: false
required: false
group: "Advanced parameters"
- variable: stork
default: true
label: "Install Stork"
description: "Storage Orchestration Runtime for Kubernetes (STORK) is a scheduler plugin that provides hyper-convergence, snapshots and storage-aware scheduling (recommended)."
type: boolean
group: "Advanced parameters"
# TODO: Once we have a stable CSI release, we will default this to enabled
#- variable: csi
# description: "Select if you want to enable CSI (Container Storage Interface). CSI is still in ALPHA."
# type: boolean
# label: "Enable CSI"
# default: false
# required: false
# group: "Advanced parameters"
- variable: storkVersion
default: "2.1.0"
default: "2.2.5"
label: "Stork version"
description: "Version of Stork to be used"
type: string
group: "Advanced parameters"
- variable: lighthouse
default: false
label: "Lighthouse"
description: "Select if you want to install Portworx Lighthouse GUI."
type: boolean
group: "Advanced parameters"
- variable: lighthouseVersion
default: "2.0.3"
description: "Version of the Lighthouse GUI to be used"
default: "2.0.5"
type: string
label: "Lighthouse version"
group: "Advanced parameters"
- variable: lighthouseSyncVersion
default: "0.3"
description: "Version of the Lighthouse sync app to be used"
type: string
label: "Lighthouse Sync version"
group: "Advanced parameters"
- variable: lighthouseStorkConnectorVersion
default: "0.1"
description: "Version of the Lighthouse stork connector to be used"
type: string
label: "Lighthouse stork connector version"
group: "Advanced parameters"
- variable: envVars
label: "Environment variables"
description: "semi-colon-separated list of environment variables that will be exported to portworx. (example: API_SERVER=http://lighthouse-new.portworx.com;MYENV1=val1;MYENV2=val2)"
description: "Enter your environment variables separated by semicolons (example: API_SERVER=http://lighthouse-new.portworx.com;MYENV1=val1;MYENV2=val2). These environment variables will be exported to Portworx."
type: string
group: "Advanced parameters"
- variable: imageVersion
default: "2.0.3.3"
description: "The Portworx image version to be used while deploying"
default: "2.1.5"
type: string
label: Portworx version to be deployed.
group: "Advanced parameters"
- variable: clusterName
description: "Name of the Portworx Cluster"
type: string
label: Portworx cluster name
default: mycluster
......
charts/portworx/v1.0.2/templates/_helpers.tpl
......@@ -138,3 +138,268 @@ Create the name of the cluster role binding to use for hooks
{{ default "default" .Values.serviceAccount.hook.name }}
{{- end -}}
{{- end -}}
{{/*
String concatenation for drives in AWS section
*/}}
{{- define "px.storage" -}}
{{- $awsType1 := .Values.drive_1.aws.type -}}
{{- $awsType2 := .Values.drive_2.aws.type -}}
{{- $awsType3 := .Values.drive_3.aws.type -}}
{{- $awsType4 := .Values.drive_4.aws.type -}}
{{- $awsType5 := .Values.drive_5.aws.type -}}
{{- $awsType6 := .Values.drive_6.aws.type -}}
{{- $awsType7 := .Values.drive_7.aws.type -}}
{{- $awsType8 := .Values.drive_8.aws.type -}}
{{- $awsType9 := .Values.drive_9.aws.type -}}
{{- $awsType10 := .Values.drive_10.aws.type -}}
{{- $awsSize1 := .Values.drive_1.aws.size -}}
{{- $awsSize2 := .Values.drive_2.aws.size -}}
{{- $awsSize3 := .Values.drive_3.aws.size -}}
{{- $awsSize4 := .Values.drive_4.aws.size -}}
{{- $awsSize5 := .Values.drive_5.aws.size -}}
{{- $awsSize6 := .Values.drive_6.aws.size -}}
{{- $awsSize7 := .Values.drive_7.aws.size -}}
{{- $awsSize8 := .Values.drive_8.aws.size -}}
{{- $awsSize9 := .Values.drive_9.aws.size -}}
{{- $awsSize10 := .Values.drive_10.aws.size -}}
{{- $awsIops1 := .Values.drive_1.aws.iops -}}
{{- $awsIops2 := .Values.drive_2.aws.iops -}}
{{- $awsIops3 := .Values.drive_3.aws.iops -}}
{{- $awsIops4 := .Values.drive_4.aws.iops -}}
{{- $awsIops5 := .Values.drive_5.aws.iops -}}
{{- $awsIops6 := .Values.drive_6.aws.iops -}}
{{- $awsIops7 := .Values.drive_7.aws.iops -}}
{{- $awsIops8 := .Values.drive_8.aws.iops -}}
{{- $awsIops9 := .Values.drive_9.aws.iops -}}
{{- $awsIops10 := .Values.drive_10.aws.iops -}}
{{- $gcType1 := .Values.drive_1.gc.type -}}
{{- $gcType2 := .Values.drive_2.gc.type -}}
{{- $gcType3 := .Values.drive_3.gc.type -}}
{{- $gcType4 := .Values.drive_4.gc.type -}}
{{- $gcType5 := .Values.drive_5.gc.type -}}
{{- $gcType6 := .Values.drive_6.gc.type -}}
{{- $gcType7 := .Values.drive_7.gc.type -}}
{{- $gcType8 := .Values.drive_8.gc.type -}}
{{- $gcType9 := .Values.drive_9.gc.type -}}
{{- $gcType10 := .Values.drive_10.gc.type -}}
{{- $gcSize1 := .Values.drive_1.gc.size -}}
{{- $gcSize2 := .Values.drive_2.gc.size -}}
{{- $gcSize3 := .Values.drive_3.gc.size -}}
{{- $gcSize4 := .Values.drive_4.gc.size -}}
{{- $gcSize5 := .Values.drive_5.gc.size -}}
{{- $gcSize6 := .Values.drive_6.gc.size -}}
{{- $gcSize7 := .Values.drive_7.gc.size -}}
{{- $gcSize8 := .Values.drive_8.gc.size -}}
{{- $gcSize9 := .Values.drive_9.gc.size -}}
{{- $gcSize10 := .Values.drive_10.gc.size -}}
{{- $usefileSystemDrive := .Values.usefileSystemDrive | default false }}
{{- $usedrivesAndPartitions := .Values.usedrivesAndPartitions | default false }}
{{- $deployEnvironmentIKS := .Capabilities.KubeVersion.GitVersion | regexMatch "IKS" }}
{{- if eq "OnPrem" .Values.environment -}}
{{- if eq "Manually specify disks" .Values.onpremStorage }}
{{- if .Values.existingDisk1 }}
"-s", "{{- .Values.existingDisk1 }}",
{{- end }}
{{- if .Values.existingDisk2 -}}
"-s", "{{- .Values.existingDisk2 }}",
{{- end }}
{{- if .Values.existingDisk3 -}}
"-s", "{{- .Values.existingDisk3 }}",
{{- end }}
{{- if .Values.existingDisk4 -}}
"-s", "{{- .Values.existingDisk4 }}",
{{- end }}
{{- if .Values.existingDisk5 }}
"-s", "{{- .Values.existingDisk5 }}",
{{- end }}
{{- else if eq "Automatically scan disks" .Values.onpremStorage -}}
{{- if or $usedrivesAndPartitions $deployEnvironmentIKS }}
"-f",
{{- end }}
{{- if eq $usedrivesAndPartitions true }}
"-A",
{{- else }}
"-a",
{{- end -}}
{{- end -}}
{{- else if eq "Cloud" .Values.environment -}}
{{- if eq "Consume Unused" .Values.deviceConfig -}}
{{- if or $usedrivesAndPartitions $deployEnvironmentIKS }}
"-f",
{{- end }}
{{- if eq $usedrivesAndPartitions true }}
"-A",
{{- else }}
"-a",
{{- end -}}
{{- end }}
{{/*------------------- ----------------- Google cloud/GKE -------------- --------------- */}}
{{- if eq "Google cloud/GKE" .Values.provider -}}
{{- if eq "Use Existing Disks" .Values.deviceConfig -}}
{{- if .Values.existingDisk1 -}}
"-s", "{{- .Values.existingDisk1 -}}",
{{- end -}}
{{- if .Values.existingDisk2 -}}
"-s", "{{- .Values.existingDisk2 -}}",
{{- end -}}
{{- if .Values.existingDisk3 -}}
"-s", "{{- .Values.existingDisk3 -}}",
{{- end -}}
{{- if .Values.existingDisk4 -}}
"-s", "{{- .Values.existingDisk4 -}}",
{{- end -}}
{{- if .Values.existingDisk5 -}}
"-s", "{{- .Values.existingDisk5 -}}",
{{- end -}}
{{- else if eq "Create Using a Spec" .Values.deviceConfig -}}
{{- if $gcType1 }}
"-s", "type=pd-{{$gcType1 | lower}},size={{$gcSize1}}",
{{- end }}
{{/*------------------- DRIVE 2 --------------- */}}
{{- if $gcType2 -}}
"-s", "type=pd-{{$gcType2 | lower}},size={{$gcSize2}}",
{{- end }}
{{/*------------------- DRIVE 3 --------------- */}}
{{- if $gcType3 -}}
"-s", "type=pd-{{$gcType3 | lower}},size={{$gcSize3}}",
{{- end }}
{{/*------------------- DRIVE 4 --------------- */}}
{{- if $gcType4 -}}
"-s", "type=pd-{{$gcType4 | lower}},size={{$gcSize4}}",
{{- end }}
{{/*------------------- DRIVE 5 --------------- */}}
{{- if $gcType5 -}}
"-s", "type=pd-{{$gcType5 | lower}},size={{$gcSize5}}",
{{- end }}
{{/*------------------- DRIVE 6 --------------- */}}
{{- if $gcType6 -}}
"-s", "type=pd-{{$gcType6 | lower}},size={{$gcSize6}}",
{{- end }}
{{/*------------------- DRIVE 7 --------------- */}}
{{- if $gcType7 -}}
"-s", "type=pd-{{$gcType7 | lower}},size={{$gcSize7}}",
{{- end }}
{{/*------------------- DRIVE 8 --------------- */}}
{{- if $gcType8 -}}
"-s", "type=pd-{{$gcType8 | lower}},size={{$gcSize8}}",
{{- end }}
{{/*------------------- DRIVE 9 --------------- */}}
{{- if $gcType9 -}}
"-s", "type=pd-{{$gcType9 | lower}},size={{$gcSize9}}",
{{- end }}
{{/*------------------- DRIVE 10 --------------- */}}
{{- if $gcType10 -}}
"-s", "type=pd-{{$gcType1 | lower}},size={{$gcSize10}}",
{{- end }}
{{- end -}}
{{/*------------------- ----------------- AWS -------------- --------------- */}}
{{- else if eq "AWS" .Values.provider -}}
{{- if eq "Use Existing Disks" .Values.deviceConfig -}}
{{- if .Values.existingDisk1 -}}
"-s", "{{ .Values.existingDisk1 }}",
{{- end -}}
{{- if .Values.existingDisk2 -}}
"-s", "{{ .Values.existingDisk2 }}",
{{- end -}}
{{- if .Values.existingDisk3 -}}
"-s", "{{ .Values.existingDisk3 }}",
{{- end -}}
{{- if .Values.existingDisk4 -}}
"-s", "{{ .Values.existingDisk4 }}",
{{- end -}}
{{- if .Values.existingDisk5 -}}
"-s", "{{ .Values.existingDisk5 }}",
{{- end -}}
{{- else if eq "Create Using a Spec" .Values.deviceConfig -}}
{{- if ne "none" $awsType1 }}
{{- if eq "GP2" $awsType1 -}}
"-s", "type={{$awsType1 | lower}},size={{$awsSize1}}",
{{- else if eq "IO1" $awsType1 -}}
"-s", "type={{$awsType1 | lower}},size={{$awsSize1}},iops={{$awsIops1}}",
{{- end }}
{{- end }}
{{/*------------------- DRIVE 2 --------------- */}}
{{- if ne "none" $awsType2 -}}
{{- if eq "GP2" $awsType2 -}}
"-s", "type={{$awsType2 | lower}},size={{$awsSize2}}",
{{- else if eq "IO1" $awsType2 -}}
"-s", "type={{$awsType2 | lower}},size={{$awsSize2}},iops={{$awsIops2}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 3 --------------- */}}
{{- if ne "none" $awsType3 }}
{{- if eq "GP2" $awsType3 -}}
"-s", "type={{$awsType3 | lower}},size={{$awsSize3}}",
{{- else if eq "IO1" $awsType3 -}}
"-s", "type={{$awsType3 | lower}},size={{$awsSize3}},iops={{$awsIops3}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 4 --------------- */}}
{{- if ne "none" $awsType4 }}
{{- if eq "GP2" $awsType4 -}}
"-s", "type={{$awsType4 | lower}},size={{$awsSize4}}",
{{- else if eq "IO1" $awsType4 -}}
"-s", "type={{$awsType4 | lower}},size={{$awsSize4}},iops={{$awsIops4}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 5 --------------- */}}
{{- if ne "none" $awsType5 }}
{{- if eq "GP2" $awsType5 -}}
"-s", "type={{$awsType5 | lower}},size={{$awsSize5}}",
{{- else if eq "IO1" $awsType5 -}}
"-s", "type={{$awsType5 | lower}},size={{$awsSize5}},iops={{$awsIops5}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 6 --------------- */}}
{{- if ne "none" $awsType6 }}
{{- if eq "GP2" $awsType6 -}}
"-s", "type={{$awsType6 | lower}},size={{$awsSize6}}",
{{- else if eq "IO1" $awsType6 -}}
"-s", "type={{$awsType6 | lower}},size={{$awsSize6}},iops={{$awsIops6}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 7 --------------- */}}
{{- if ne "none" $awsType7 }}
{{- if eq "GP2" $awsType7 -}}
"-s", "type={{$awsType7 | lower}},size={{$awsSize7}}",
{{- else if eq "IO1" $awsType7 -}}
"-s", "type={{$awsType7 | lower}},size={{$awsSize7}},iops={{$awsIops7}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 8 --------------- */}}
{{- if ne "none" $awsType8 }}
{{- if eq "GP2" $awsType8 -}}
"-s", "type={{$awsType8 | lower}},size={{$awsSize8}}",
{{- else if eq "IO1" $awsType8 -}}
"-s", "type={{$awsType8 | lower}},size={{$awsSize8}},iops={{$awsIops8}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 9 --------------- */}}
{{- if ne "none" $awsType9 }}
{{- if eq "GP2" $awsType9 -}}
"-s", "type={{$awsType9 | lower}},size={{$awsSize9}}",
{{- else if eq "IO1" $awsType9 -}}
"-s", "type={{$awsType9 | lower}},size={{$awsSize9}},iops={{$awsIops9}}",
{{- end -}}
{{- end }}
{{/*------------------- DRIVE 10 --------------- */}}
{{- if ne "none" $awsType10 }}
{{- if eq "GP2" $awsType10 -}}
"-s", "type={{$awsType10 | lower}},size={{$awsSize10}}",
{{- else if eq "IO1" $awsType10 -}}
"-s", "type={{$awsType10 | lower}},size={{$awsSize10}},iops={{$awsIops10}}",
{{- end -}}
{{- end }}
{{- end -}}
{{- end -}}
{{- end -}}
{{- end }}
charts/portworx/v1.0.2/templates/hooks/pre-install/etcd-preinstall-hook.yaml deleted 100644 → 0
{{- $customRegistryURL := .Values.customRegistryURL | default "none" }}
{{- $registrySecret := .Values.registrySecret | default "none" }}
{{- $etcdCertPath := .Values.etcd.certPath | default "none" }}
{{- $etcdCA := .Values.etcd.ca | default "none" }}
{{- $etcdCert := .Values.etcd.cert | default "none" }}
{{- $etcdKey := .Values.etcd.key | default "none" }}
apiVersion: batch/v1
kind: Job
metadata:
namespace: kube-system
name: px-hook-etcd-preinstall
labels:
heritage: {{.Release.Service | quote }}
release: {{.Release.Name | quote }}
app.kubernetes.io/managed-by: {{.Release.Service | quote }}
app.kubernetes.io/instance: {{.Release.Name | quote }}
chart: "{{.Chart.Name}}-{{.Chart.Version}}"
annotations:
"helm.sh/hook": pre-install
"helm.sh/hook-weight": "-5"
"helm.sh/hook-delete-policy": before-hook-creation
spec:
{{ if semverCompare ">= 1.8-0" .Capabilities.KubeVersion.GitVersion }}
backoffLimit: 0
{{ else }}
activeDeadlineSeconds: 30
{{ end }}
template:
spec:
{{- if not (eq $registrySecret "none") }}
imagePullSecrets:
- name: {{ $registrySecret }}
{{- end }}
restartPolicy: Never
containers:
- name: pre-install-job
terminationMessagePath: '/dev/termination-log'
terminationMessagePolicy: 'FallbackToLogsOnError'
imagePullPolicy: Always
{{- if eq $customRegistryURL "none" }}
image: "portworx/px-etcd-preinstall-hook:v1.2"
{{- else}}
image: "{{ $customRegistryURL }}/portworx/px-etcd-preinstall-hook:v1.2"
{{- end }}
{{- if not (eq $etcdCertPath "none") }}
command: ['/bin/bash']
args: ['/usr/bin/etcdStatus.sh',
"{{ .Values.kvdb }}",
{{- if ne $etcdCA "none" }}
"{{$etcdCA}}",
{{- end -}}
{{- if ne $etcdCert "none" }}
"{{$etcdCert}}",
{{- end -}}
{{- if ne $etcdKey "none" }}
"{{$etcdKey}}",
{{- end -}}
]
volumeMounts:
- mountPath: /etc/pwx/etcdcerts
name: etcdcerts
volumes:
- name: etcdcerts
secret:
secretName: px-etcd-certs
items:
- key: ca.pem
path: ca.pem
{{- if ne $etcdCert "none" }}
- key: client.pem
path: client.pem
{{- end -}}
{{- if ne $etcdKey "none" }}
- key: client-key.pem
path: client-key.pem
{{- end -}}
{{- else}}
command: ['/bin/bash']
args: ['/usr/bin/etcdStatus.sh',"{{ .Values.kvdb }}"]
{{- end}}
charts/portworx/v1.0.2/templates/portworx-controller.yaml
......@@ -30,13 +30,13 @@ rules:
verbs: ["get", "list", "watch"]
- apiGroups: [""]
resources: ["endpoints", "services"]
verbs: ["create", "delete", "get"]
verbs: ["create", "delete", "get", "update"]
- apiGroups: [""]
resources: ["secrets"]
verbs: ["get", "list"]
- apiGroups: [""]
resources: ["nodes"]
verbs: ["get", "list"]
verbs: ["get", "list", "watch"]
- apiGroups: [""]
resources: ["events"]
verbs: ["watch"]
......@@ -63,7 +63,7 @@ roleRef:
name: portworx-pvc-controller-role
apiGroup: rbac.authorization.k8s.io
---
apiVersion: extensions/v1beta1
apiVersion: apps/v1
kind: Deployment
metadata:
annotations:
......@@ -87,15 +87,10 @@ spec:
name: portworx-pvc-controller
tier: control-plane
spec:
{{- if (and (.Values.openshiftInstall) (eq .Values.openshiftInstall true))}}
imagePullSecrets:
- name: {{ required "A registry secret is required for openshift installation" .Values.registrySecret }}
{{- else }}
{{- if not (empty .Values.registrySecret) }}
imagePullSecrets:
- name: {{ .Values.registrySecret }}
{{- end }}
{{- end }}
containers:
- command:
- kube-controller-manager
......
charts/portworx/v1.0.2/templates/portworx-csi.yaml
......@@ -49,7 +49,7 @@ spec:
clusterIP: None
---
kind: StatefulSet
apiVersion: apps/v1beta1
apiVersion: apps/v1
metadata:
name: px-csi-ext
namespace: kube-system
......
charts/portworx/v1.0.2/templates/portworx-ds.yaml
{{/* Setting defaults if they are omitted. */}}
{{- $deployEnvironmentIKS := .Capabilities.KubeVersion.GitVersion | regexMatch "IKS" }}
{{- $usefileSystemDrive := .Values.usefileSystemDrive | default false }}
{{- $drives := .Values.drives | default "none" }}
{{- $usedrivesAndPartitions := .Values.usedrivesAndPartitions | default false }}
{{- $secretType := .Values.secretType | default "k8s" }}
{{- $journalDevice := .Values.journalDevice | default "none" }}
{{- $maxStorageNodes := .Values.maxStorageNodes | default "none" }}
{{- $customRegistryURL := .Values.customRegistryURL | default "none" }}
{{- $registrySecret := .Values.registrySecret | default "none" }}
......@@ -15,35 +15,40 @@
{{- $isCoreOS := .Values.isTargetOSCoreOS | default false }}
{{- $pksInstall := .Values.pksInstall | default false }}
{{- $internalKVDB := .Values.internalKVDB | default false }}
{{- $internalKVDB := .Values.etcdType | default "none" }}
{{- $csi := .Values.csi | default false }}
{{- $etcdCredentials := .Values.etcd.credentials | default "none:none" }}
{{- $etcdCertPath := .Values.etcd.certPath | default "none" }}
{{- $etcdCertPath := .Values.etcd.ca | default "none" }}
{{- $etcdCA := .Values.etcd.ca | default "none" }}
{{- $etcdCert := .Values.etcd.cert | default "none" }}
{{- $etcdKey := .Values.etcd.key | default "none" }}
{{- $consulToken := .Values.consul.token | default "none" }}
{{- $misc := .Values.misc | default "" | split " " }}
{{- $etcdEndPoints := .Values.kvdb -}}
{{- $etcdEndPoints := .Values.kvdb }}
apiVersion: extensions/v1beta1
apiVersion: apps/v1
kind: DaemonSet
metadata:
name: portworx
namespace: kube-system
labels:
name: portworx
spec:
minReadySeconds: 0
updateStrategy:
type: RollingUpdate
rollingUpdate:
maxUnavailable: 1
selector:
matchLabels:
name: portworx
app: portworx
template:
metadata:
labels:
app: portworx
name: portworx
# {{- include "px.labels" . | indent 8 }}
spec:
affinity:
nodeAffinity:
......@@ -74,25 +79,10 @@ spec:
terminationMessagePath: "/tmp/px-termination-log"
imagePullPolicy: Always
args:
{{- with .Values }}
[
{{- if eq $drives "none" }}
{{- if eq $usedrivesAndPartitions true }}
"-A",
{{- else }}
"-a",
{{- end -}}
{{- if or $usefileSystemDrive $deployEnvironmentIKS }}
"-f",
{{- end }}
{{- else }}
{{- $driveNames := $drives | split ";" }}
{{- range $index, $name := $driveNames }}
"-s", "{{ $name }}",
{{- end -}}
{{- end -}}
{{- if eq $internalKVDB true }}
{{ include "px.storage" . | indent 0 }}
{{- with .Values -}}
{{- if eq "Built-in" $internalKVDB }}
"-b",
{{- end -}}
......@@ -100,14 +90,19 @@ spec:
"-j", "{{ $journalDevice }}",
{{- end -}}
{{- if empty $etcdEndPoints }}
{{- if eq $internalKVDB false }}
{{- if $etcdEndPoints -}}
"-k", "{{ regexReplaceAllLiteral "(;)" .kvdb "," }}",
{{- else }}
{{- if ne "Built-in" $internalKVDB }}
{{- if eq "US region" .region }}
"-k", "etcd:http://px-etcd1.portworx.com:2379,etcd:http://px-etcd2.portworx.com:2379,etcd:http://px-etcd3.portworx.com:2379",
{{- else if eq "EU region" .region }}
"-k", "etcd:http://px-eu-etcd1.portworx.com:2379,etcd:http://px-eu-etcd2.portworx.com:2379,etcd:http://px-eu-etcd3.portworx.com:2379",
{{- else }}
"{{ required "A valid kvdb url is required." .kvdb }}"
{{- end -}}
{{- else }}
"-k", "{{ regexReplaceAllLiteral "(;)" .kvdb "," }}",
{{- end -}}
{{- end -}}
"-c", "{{ required "Clustername cannot be empty" .clusterName }}",
{{- if ne $secretType "none" }}
......@@ -118,11 +113,11 @@ spec:
{{- end -}}
{{- end -}}
{{- if ne $dataInterface "none" }}
{{- if and (ne $dataInterface "none") (ne $dataInterface "auto")}}
"-d", "{{ $dataInterface }}",
{{- end -}}
{{- if ne $managementInterface "none" }}
{{- if and (ne $managementInterface "none") (ne $managementInterface "auto") }}
"-m", "{{ $managementInterface }}",
{{- end -}}
......@@ -131,15 +126,15 @@ spec:
{{- end -}}
{{- if ne $etcdCA "none" }}
"-ca", "{{ $etcdCA }}",
"-ca", "/etc/pwx/etcdcerts/{{ $etcdCA }}",
{{- end -}}
{{- if ne $etcdCert "none" }}
"-cert", "{{ $etcdCert }}",
"-cert", "/etc/pwx/etcdcerts/{{ $etcdCert }}",
{{- end -}}
{{- if ne $etcdKey "none" }}
"-key", "{{ $etcdKey }}",
"-key", "/etc/pwx/etcdcerts/{{ $etcdKey }}",
{{- end -}}
{{- if ne $consulToken "none" }}
......@@ -153,8 +148,8 @@ spec:
{{ end -}}
"-x", "kubernetes"
{{- end -}}
]
{{- end }}
env:
- name: "PX_TEMPLATE_VERSION"
value: "v2"
......@@ -308,21 +303,17 @@ spec:
restartPolicy: Always
serviceAccountName: px-account
volumes:
{{- if not (eq $etcdCertPath "none") }}
{{- if ne $etcdCertPath "none" }}
- name: etcdcerts
secret:
secretName: px-etcd-certs
items:
- key: ca.pem
path: ca.pem
{{- if ne $etcdCert "none" }}
- key: client.pem
path: client.pem
{{- end -}}
{{- if ne $etcdKey "none" }}
- key: client-key.pem
path: client-key.key
{{- end -}}
- key: "{{ $etcdCA }}"
path: "{{ $etcdCA }}"
- key: "{{ $etcdCert }}"
path: "{{ $etcdCert }}"
- key: "{{ $etcdKey }}"
path: "{{ $etcdKey }}"
{{- end}}
- name: dockersock
hostPath:
......
charts/portworx/v1.0.2/templates/portworx-lighthouse.yaml
......@@ -55,7 +55,7 @@ spec:
selector:
tier: px-web-console
---
apiVersion: apps/v1beta2
apiVersion: apps/v1
kind: Deployment
metadata:
name: px-lighthouse
......
charts/portworx/v1.0.2/templates/portworx-rbac-config.yaml
......@@ -34,6 +34,12 @@ rules:
- apiGroups: ["portworx.io"]
resources: ["volumeplacementstrategies"]
verbs: ["get", "list"]
- apiGroups: ["stork.libopenstorage.org"]
resources: ["backuplocations"]
verbs: ["get", "list"]
- apiGroups: [""]
resources: ["events"]
verbs: ["create"]
---
kind: ClusterRoleBinding
......
charts/portworx/v1.0.2/templates/portworx-service.yaml
......@@ -8,7 +8,7 @@ metadata:
spec:
selector:
name: portworx
type: NodePort
type: ClusterIP
ports:
- name: px-api
protocol: TCP
......@@ -33,7 +33,7 @@ metadata:
spec:
selector:
name: portworx-api
type: NodePort
type: ClusterIP
ports:
- name: px-api
protocol: TCP
......
charts/portworx/v1.0.2/templates/portworx-stork.yaml
{{- if (.Values.stork) and (eq .Values.stork true)}}
{{- $isCoreOS := .Values.isTargetOSCoreOS | default false }}
{{- $customRegistryURL := .Values.customRegistryURL | default "none" }}
{{- $registrySecret := .Values.registrySecret | default "none" }}
{{- $isCoreOS := .Values.isTargetOSCoreOS | default false }}
{{- $customRegistryURL := .Values.customRegistryURL | default "none" }}
{{- $registrySecret := .Values.registrySecret | default "none" }}
apiVersion: v1
kind: ConfigMap
......@@ -63,61 +63,16 @@ apiVersion: {{ template "rbac.apiVersion" . }}
metadata:
name: stork-role
rules:
- apiGroups: [""]
resources: ["pods", "pods/exec"]
verbs: ["get", "list", "delete", "create"]
- apiGroups: [""]
resources: ["persistentvolumes"]
verbs: ["get", "list", "watch", "create", "delete"]
- apiGroups: [""]
resources: ["persistentvolumeclaims"]
verbs: ["get", "list", "watch", "update"]
- apiGroups: ["storage.k8s.io"]
resources: ["storageclasses"]
verbs: ["get", "list", "watch"]
- apiGroups: [""]
resources: ["events"]
verbs: ["list", "watch", "create", "update", "patch"]
- apiGroups: ["stork.libopenstorage.org"]
resources: ["rules"]
verbs: ["get", "list"]
- apiGroups: ["stork.libopenstorage.org"]
resources: ["migrations", "clusterpairs", "groupvolumesnapshots"]
verbs: ["get", "list", "watch", "update", "patch"]
- apiGroups: ["apiextensions.k8s.io"]
resources: ["customresourcedefinitions"]
verbs: ["create", "list", "watch", "delete", "get"]
- apiGroups: ["volumesnapshot.external-storage.k8s.io"]
resources: ["volumesnapshots"]
verbs: ["get", "list", "watch", "create", "update", "patch", "delete"]
- apiGroups: ["volumesnapshot.external-storage.k8s.io"]
resources: ["volumesnapshotdatas"]
verbs: ["get", "list", "watch", "create", "update", "patch", "delete"]
- apiGroups: [""]
resources: ["configmaps"]
verbs: ["get", "create", "update"]
- apiGroups: [""]
resources: ["services"]
verbs: ["get"]
- apiGroups: [""]
resources: ["nodes"]
verbs: ["get", "list", "watch"]
- apiGroups: ["*"]
resources: ["deployments", "deployments/extensions"]
verbs: ["list", "get", "watch", "patch", "update", "initialize"]
- apiGroups: ["*"]
resources: ["statefulsets", "statefulsets/extensions"]
verbs: ["list", "get", "watch", "patch", "update", "initialize"]
- apiGroups: ["*"]
resources: ["*"]
verbs: ["list", "get"]
verbs: ["*"]
---
kind: ClusterRoleBinding
apiVersion: {{ template "rbac.apiVersion" . }}
metadata:
name: stork-role-binding
subjects:
- kind: ServiceAccount
- kind: ServiceAccount
name: stork-account
namespace: kube-system
roleRef:
......@@ -138,7 +93,29 @@ spec:
port: 8099
targetPort: 8099
---
apiVersion: extensions/v1beta1
apiVersion: apiextensions.k8s.io/v1beta1
kind: CustomResourceDefinition
metadata:
name: volumeplacementstrategies.portworx.io
spec:
group: portworx.io
versions:
- name: v1beta2
served: true
storage: true
- name: v1beta1
served: false
storage: false
scope: Cluster
names:
plural: volumeplacementstrategies
singular: volumeplacementstrategy
kind: VolumePlacementStrategy
shortNames:
- vps
- vp
---
apiVersion: apps/v1
kind: Deployment
metadata:
annotations:
......@@ -154,6 +131,10 @@ spec:
maxUnavailable: 1
type: RollingUpdate
replicas: 3
selector:
matchLabels:
name: stork
tier: control-plane
template:
metadata:
annotations:
......@@ -260,7 +241,7 @@ apiVersion: {{ template "rbac.apiVersion" . }}
metadata:
name: stork-scheduler-role-binding
subjects:
- kind: ServiceAccount
- kind: ServiceAccount
name: stork-scheduler-account
namespace: kube-system
roleRef:
......@@ -268,7 +249,7 @@ roleRef:
name: stork-scheduler-role
apiGroup: rbac.authorization.k8s.io
---
apiVersion: apps/v1beta1
apiVersion: apps/v1
kind: Deployment
metadata:
labels:
......@@ -278,6 +259,10 @@ metadata:
namespace: kube-system
spec:
replicas: 3
selector:
matchLabels:
component: scheduler
tier: control-plane
template:
metadata:
labels:
......@@ -320,4 +305,4 @@ spec:
topologyKey: "kubernetes.io/hostname"
hostPID: false
serviceAccountName: stork-scheduler-account
{{- end }}
{{- end }}
charts/portworx/v1.0.2/values.yaml
# Please uncomment and specify values for these options as per your requirements.
drives: none # NOTE: This is a ";" seperated list of drives. For eg: "/dev/sda;/dev/sdb;/dev/sdc" Defaults to use -A switch.
usefileSystemDrive: false # true/false Instructs PX to use an unmounted Drive even if it has a filesystem.
usedrivesAndPartitions: false # Defaults to false. Change to true and PX will use unmounted drives and partitions.
journalDevice:
kvdb:
ownEtcdOption: none
etcdAuth: none
etcdType: none # KVDB type
kvdb: "etcd:http://192.168.70.90:2379"
internalKVDB: false # internal KVDB
etcd:
credentials: none:none # Username and password for ETCD authentication in the form user:password
ca: none # Name of CA file for ETCD authentication. server.ca
......@@ -13,13 +11,11 @@ etcd:
key: none # Name of certificate key for ETCD authentication Should be server.key
consul:
token: none # ACL token value used for Consul authentication. (example: 398073a8-5091-4d9c-871a-bbbeb030d1f6)
region: none # US or EU regions for Portworx hosted etcds
dataInterface: none # Name of the interface <ethX>
managementInterface: none # Name of the interface <ethX>
isTargetOSCoreOS: false # Is your target OS CoreOS? Defaults to false.
pksInstall: false # installation on PKS (Pivotal Container Service)
AKSorEKSInstall: false # installation on AKS or EKS.
platformOptions: none # AKS, EKS or GKE platforms
customRegistryURL:
registrySecret:
......@@ -28,12 +24,12 @@ clusterName: mycluster # This is the default. please change it to
secretType: k8s # Defaults to None, but can be AWS / KVDB / Vault.
envVars: none # NOTE: This is a ";" seperated list of environment variables. For eg: MYENV1=myvalue1;MYENV2=myvalue2
stork: true # Use Stork https://docs.portworx.com/scheduler/kubernetes/stork.html for hyperconvergence.
storkVersion: 2.1.0
storkVersion: 2.2.5
lighthouse: true
lighthouseVersion: 2.0.3
lighthouseSyncVersion: 0.3
lighthouseStorkConnectorVersion: 0.1
lighthouseVersion: 2.0.5
lighthouseSyncVersion: 2.0.5
lighthouseStorkConnectorVersion: 2.0.5
deployOnMaster: false # For POC only
csi: false # Enable CSI
......@@ -45,4 +41,113 @@ serviceAccount:
deploymentType: oci # accepts "oci" or "docker"
imageType: none #
imageVersion: 2.0.3.3 # Version of the PX Image.
imageVersion: 2.1.5 # Version of the PX Image.
result: none
environment: none
onpremStorage: none
maxStorageNodes: none
journalDevice: none
usefileSystemDrive: false # true/false Instructs PX to use an unmounted Drive even if it has a filesystem.
usedrivesAndPartitions: false # Use unmounted disks even if they have a partition or filesystem on it. PX will never use a drive or partition that is mounted. (useDrivesAndPartitions)
provider: none
deviceConfig: none
drive_1:
aws:
type: none
size: none
iops: none
gc:
type: standard
size: 1000
drive_2:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_3:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_4:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_5:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_6:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_7:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_8:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_9:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
drive_10:
aws:
type: none
size: none
iops: none
gc:
type: none
size: none
existingDisk1: none
existingDisk2: none
existingDisk3: none
existingDisk4: none
existingDisk5: none
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment